AHC series
Customization. Born rigid. Born versatile.
- Machine base is built as heavy as 18000 kg to offer the most rigid structure.
- 0.001° B-axis rotary table Ø800 mm embedded in fixed table plate 1600 x 810 mm, making it a highly versatile horizontal machining center.
- Spindle BT-50 with auto 2-speed gearbox and max. 26 kw power puts out a high-torque outcome for heavy cutting.
Please scroll left and right for full information
ITEM / MODEL | AHC-1600 |
Travels | |
Longitudinal travel X axis (mm) | 1600 |
Vertical travel Y axis (mm) | 1270 |
Column travel Z axis (mm) | 1016 |
Spindle center to table top | 140 – 1410 |
Spindle nose to table center | 200 - 1216 |
Table (Combination) | |
Flat table working surface (mm) | 1600 x 810 |
Rotary table diameter (mm) | Ø800 |
Max. workload on flat table (kg) | 4600 |
Max. workload on rotary table (kg) | 2000 |
Table surface | Ground / T-slotted |
No. of T-slots x width (mm) | 5 x 18 |
Spindle (Standard) | |
Spindle motor (Cont./30 min.) (kw) | 22/26 |
Spindle torque (Max.) (Nm) | 780 at 375 rpm |
Spindle taper | ISO-50 |
Spindle drive system | Auto 2-speed gearbox |
Spindle speed (rpm) | 0 – 6000 |
Spindle (Optional direct drive spindle) | |
Spindle motor (Cont./30 min.) (kw) | 22/26 |
Spindle torque (Max.) (Nm) | 350 at 500 rpm |
Spindle taper | ISO-50 |
Spindle drive system | Direct drive |
Spindle speed (rpm) | 0 – 10000 |
Spindle (Optional integral motor spindle) | |
Spindle motor (kw) | 41 (High torque) |
Spindle torque (Max.) (Nm) | 406 at 1000 rpm |
Spindle taper | HSK-100A |
Spindle drive system | Integral motor |
Spindle speed (rpm) | 0 – 15000 |
Automatic tool changer (Arm type) | |
Number of tools | 40 (Std.) 60, 80, 120 or more (Opt.) |
Tool selection | Bi-directional random |
Tool change time | 6 sec (Tool to tool) |
Max. tool diameter with adjacent tools (mm) | 125 |
Max. tool diameter without adjacent tools (mm) | 250 |
Max. tool weight (kg) | 15 |
Tool type | CAT-50 (BT-50 / HSK-100A opt.) |
Max. tool length (mm) | 400 |
Ballscrews and axis motors | |
X-Y-Z ballscrew diameter x Pitch(mm) | Ø50 x 10 |
Ballscrew type | Class 3 double nut pre-loaded |
Ballscrew mounting type | Pre-tensioned |
X/Y/Z/B servo motor (kw) | 7.0/4.0/7.0/4.0 |
Servo motor mounting | Direct coupled XYZ |
Feeds | |
Rapid traverse rate X/Y/Z/B (m/min) | 15/15/15/4 |
Rapid traverse rate B-axis rotary table (rpm) | 11.1 |
Cutting feed rate X/Y/Z (mm/min) | 12000/12000/12000 |
Linear positioning accuracy (mm) | ±0.008 full stroke |
Linear repeatability (mm) | ±0.005 full stroke |
B-axis positioning with / without encoder (arc sec) | 5 / 15 |
General | |
Coolant tank capacity (L) | 450 |
Machine weight (kg) | 20000 |
Machine dimensions (L x W x H) (mm) | 4375 x 5560 x 3585 |
Machine power source | 220 V, 3 phase, 60 Hz |
Air source (bar) | 6 |
All the specifications above are subject to change without prior notice.
Standard Accessories
- Fanuc 0i-MF PLUS: a.10.4” LCD b.Manual Guide i
- Flood coolant system with programmable air blast
- Automated chip removal system with 4 screw type chip conveyors + chip buckets
- LED working lights
- 3-color signal tower
- Oil cooler for spindle & gearbox
- MPG
- Heat exchangers for electric cabinet
- Hydraulic counterbalance for headstock
- Rigid tapping
- 0.001° B-axis rotary table Ø800mm embedded into flat table 1600 x 810mm
- 40-tool ATC
- Full enclosure with interlocks system
- Complete set of machine manuals in English
- 1 pc of toolbox for basic maintenance
- Foundation bolts and levelling pads
- Automatic centralized lubrication system for ball screws and guideways with alarms
Optional Accessories
- Fanuc 31i-MB PLUS with 15” LCD
- Siemens SINUMERIK 828D with 10.4” LCD
- Siemens SINUMERIK ONE with 15” LCD
- Auto tool touch probe Renishaw TS-27R with automatic protective cover
- Auto non-contact tool probe Renishaw NC4 with automatic protective cover
- Workpiece measuring device Renishaw OMP60 (infrared transmission)
- Workpiece measuring device Renishaw RMP60 (radio transmission)
- 60, 80, 100 or more tools for ATC
- CTS 20 bar or 70 bar with cartridge type filtration system
- Paper filtration system
- Direct drive spindle at max. 10000 rpm with 26 kw or 30 kw max. power
- Motor spindle at max. 15000 rpm with 41 kw max. power
- Linear scales on X, Y & Z axes
- Absolute encoder on rotary table